This and that

No Herbie trips to report at the moment, although we did a short canal visit last week when we went (by car) to Banbury which is on the Oxford canal. I'd forgotten how small the single locks look. We are getting so used to the two-boat-width ones on the GU that the single ones seem tiny. We prefer single locks really as they hold the boat snug, are lighter to operate and they fill / empty faster. Next year we hope to do the Oxford canal on Herbie.

The reason we were in Banbury was to go to Banbury Folk Club to see one of my favourite performers, Anna Ryder, who was absolutely brilliant (check out her web site here ). In over forty years of folk clubbing I must have seen thousands of performers, and Anna ranks with the best (IMHO). Apart from the fact that she can play anything (like piano and trumpet simultaneosly), her songs are so original and her general enthusiasm and energy is always a treat. I defy anyone not to enjoy seeing her perform. The club organiser Derek Droscher is an old chum of ours. Poor old Derek is now suffering the attentions of the Performing Rights Society (PRS) who want a sizeable cut of his door takings to cover copyright. This is the first time I have come across this in a small folk club, and were it to become general practice it would surely shut down 90% of the small clubs out there :-(

I'm just reading "Idle Women" by Susan Woolfitt. Its a true account of the lives of women who supported the war effort in the 1940s by operating narrowboat freight transport. I have to say its an unexpectedly good read, made all the better by her regular references to places on the cut that we know so well from our travels in Herbie.

Waterways Protests

You may well have seen reports of the many Save Our Waterways protests that happened over the weekend. We were unable to get out to our nearest one because of Jacob's birthday celebrations, but we were with them in spirit. In case you missed it, its all about the government cutting the grant to British Waterways because DEFRA has been fined £millions by the EC over mishandling of farmer's subsidies. Boaters are afraid that all the good work restoring and maintaining canals in recent years will be undone. We know this only too well, living as we do near the Basigstoke canal which was reopened after many years of volunteer activity (doing all the digging, lock repair etc.), and is now closed off and already slipping back into disrepair because of underfunding. If you want to see the benefit to ordinary folks of waterways development, just look at the transformation of Birmingham's Gas Street area. What was a slum is now a thriving night spot, and bringing in loads of tourist income.

If are sympathetic to the cause you can easily help by signing the electronic petition at the 10 Downing Street website http://petitions.pm.gov.uk/SaveOurWaterways/. You can find our more, at the camapign website www.savourwaterways.org.uk


Nuff said

A reminder of a sticky adventure

This is a picture of Olive, a converted Humber Keel that resides at Cowley on the Grand Union. We pass her every time we go North from our base. A good number of years ago I had the chance of a trip on her, and an interesting trip it was!

Olive is the floating home of a friend (Dave 1) of a friend (Dave 2), and she was due to have her bottom scraped, inspected and blacked. Being such a big boat, it was decided that the best way to get her out of the water was to take down onto the Thames to Isleworth, where she could be floated onto supports which would be exposed at low tide. So that was the plan.

I was recruited, with Dave2 to help through the Locks on the way to the Thames, and invited to do a turn on the tiller on the way. Everything about Olive is huge. To operate the tiller, which was about 8ft long, you couldn't just stand still and move it with your arm, you had to walk side to side across the deck! Getting under bridges was a matter of ducking down low. Dave1 was a bit concerned about the low bridge on the tidal stretch at Brenford, and we knew we had to wait until the tide was right to get through.

All went well until we arrived at our first lock (Norwood top lock on the GU, where we went through on Herbie a few days ago). getting in to the lock was fine, although Olive was about 14ft1 in wide and the lock was only a smidge wider. The water was duly drawn off and Olive descended gracefully to the lower level. Gates open and off we go, - except that we didn't! The lock sides obviously narrowed at some point and Olive was stuck. We tried full power to push her through. No deal.

Dave 1 was getting anxious at this point. His home was jammed in a lock.

We decided to refill the lock, back Olive out at the top, and think what to do next. The problem was that this did no good as Olive was still stuck. A quick phone call to BW was made and an operative appeared shortly. "I know Olive has been through this lock a few years back", he said,"but I think the lock sides have bowed in a bit since. We'll open all the paddles and try and flush her through." So the bottom gates were opened, all the sluices were opened, and a tremendous force of water surged through the lock. Still no joy. Olive was well and truly jammed.

"We'll have to pull her back out at the top" said Mr BW, "I'll go and get a work boat and pull her out. There's one moored just up the way." In only a few minutes he was back on a little blue tug thingy and a big rope. The rope was tied fast to Olive and with a tremendous splashing and churning, the little tug with its big engine strained at the rope. Tighter and tighter it went, until with a loud crack the rope gave way. Had the rope hit any of us at that point it might have killed us, such was the speed at which it flew.

By now we had gathered quite a few onlookers, it being a sunny weekend day. Various suggestions were made, such as taking an angle grinder to the lock wall, or applying a layer of grease to it. Dave 1 was not amused. This was his home we were talking about.

An hour passed, with various attempts at this and that, and a queue of boats was forming, waiting to use the lock. Things were looking desperate. Suddenly, someone said, "I can see her moving", and sure enough, for no explicable reason Olive seemed to have freed herself! Dave 1 was decisive. "Right, "he said, "we're going back home. We'll never get through all these locks. I'll have to have the bottom done somewhere else." Out of the lock we backed, Olive was turned and we set off back towards Cowley, which Dave1 not a happy bunny.

It was now getting very late and when we arrived back at Cowley it was pitch dark. Amazingly we managed to turn Olive and squeeze her into her moorings (which only have inches to spare at either end) by torchlight.

Well, that's the story. Olive's bottom today looks like it has had its clean up, probably in the dry dock at Uxbridge. Dave2 was pleased to see her when we passed her on Herbie last week. Whether she'll ever see the Thames again is anybody's guess.

Five more days afloat

Despite the short days and variable temperatures, the canals are looking lovely at the moment with all their autumn colours. last Friday and Saturday we entertained old friends David and Helen aboard Herbie. On Friday the weather was appalling! Very heavy rain and strong winds too. I got soaked just taking the boat 100 yards up to the boathouse to load up. Needless to say we didn't go far that day, just 2 miles to get out of the Slough arm and 10 more minutes up the Grand Union to a sheltered mooring near Cowley lock. Luckily, Saturday was really sunny and pleasant and we managed to get up to Harefield marina and back before dark.

David showed his skill at the tiller (he is an experienced sailor), executing an immaculate turn into the narrow entrance of the Slough arm on our return. Here he is taking us down towards Uxbridge below Denham lock, the deepest on the GU.

The colours of the hedgerow are stunning in places. Just look at the variety of shades in this short stretch of bank on the Slough Arm.

Having returned our guests to their car, we had just enough time to get Herbie down to the winding hole and back so we would be facing the right way next morning. It was a race against the rapidly failing light. At the winding hole we did our best ever turn, straight round in one go like a handbrake turn. We needed our tunnel light on when we got back to our mooring, but we made it.

Next morning our regular crew mate Pete Higson joined us for a cruise where we planned to break new ground. Up until now we hadn't gone further south on the GU than Bulls Bridge at Hayes. This time we were to go all the way down to Brentford, close to where the canal joins the Thames. Once again our range was constrained by available daylight, so that night we got as far as the Fox pub below the eight lock Hanwell flight. This is an attractive flight of locks, most being less than a hundred yards from the next. They're quite deep too, so by the time you get to the bottom, you've come down quite a hill. Part way down is the famous Three Bridges where the railway, the canal, and the road all cross at the same point (the canal being over the rail and under the road). Vey difficult to get a good photo, but here we are on the canal crossing the railway, with the road immediately above us. I'm not sure what went over the disused bridge you can also see.

The Fox is to be recommended, being just a few yards from the canal, and service as good a pint of Timothy Taylors as you'll get anywhere.

Next morning we carried on down to Brentford, and were all surprised by the countryside feel of it all. Only in the last half mile does London reveal itself with the mighty GlaxoSmithKlein building (the one at the end of the M4) looming over the tree tops.

Eventually we see it from the other side as we approach the basin at Brentford gauging lock. (Pete at the helm here).

The basin would be a good spot to stay for a few days in London - mooring is free for 14 days.

We only stayed a couple of hours. Enough to walk down to Syon Park and to the Thames at Isleworth where the speed of the tidal current looked somewhat alarming to us narrowboaters. We plan to take Herbie through there next year. I guess we'll do it at a gentler stage of the tide.

That evening we returned tpo the Fox for a meal, but they don't do food on Mondays so we walked on to the Viaduct, a splendid Fuller's pub nearby. The influx or Polish workers seems to have at least one beneficial effect here as the waitress (who was excellent) was Polish and there were Polish dishes on the menu. We had Bigos, a Polish hunter's stew containing sausages and pork and cabbage, and it was just the job on a cold night. The beer, being Fullers, was of course pretty good too.

Next day we had to get back to base, and took Herbie up the Hanwell flight in double quick time. The locks were all set in our favour, presumably because the last boat to use them was us on the way down two days earlier. The canal was of course full of leaves at this time of year, and sometimes the water in the locks looked like a thick leaf soup!

Before turning down the Slough arm for home we detoured into Uxbridge to fill up with diesel. At Denham Yatch Basin their it was 45p a litre as against 60p at our boat yard. So as we needed a hundred litres that saved us 15 quid!

Then the short dash for home before dark. On the way we got caught in a hailstorm and it got very very cold standing out at the tiller.

All in all an excellent trip, and we were impressed enough with the Brentford strech to add it to our pleasure cruising repertoire.

We're certified!

Herbie was retested today by the Boat Safety Examiner and we passed:-). Not without some difficulty I might add. The inspector's manometer kept showing a very slight gas leak, so I had to keep clambering in and out of the very cramped gas locker with a pair of spanners to tighten up the various connections. I was afraid of overtightening, which you can easily do with compression fittings. It took nearly an hour of tightening and testing until she was happy. Anyway we're certified safe now for four more years. All in all it cost £193 for the inspection, retest, certificate and report, and £30 or so for new hose, regulator and compression fittings etc. A good job its not an annual exercise.

Today I did my first trip from home to the boat by public transport (plus a 30 minute walk). It actually takes over ten minutes to (briskly) walk the length of the line of boats at our moorings. I think there are about 70 or 80 boats in all, mostly breasted up in pairs.

Buses are really cheap on this trip. I can get a green line coach from Bracknell to Langley (an hour's ride) for only £2 if I go after 11am. In January, when I turn 60, it'll be free! Getting older has some benefits.

A riveting picture

I couldn't resist taking this photo yesterday when I was at the boatyard. What a fantastic patchwork hull. More interesting than a lot of the new boats with faux" rivets. It's just had the epoxy treatment - very expensive - about two grand I think.

A disappointment, some fireworks, and a recovery.

Curses. I got a phone call to say I still had a small gas leak on the boat when they retested following my fitting of a new regulator and hose. The test pressure was falling over a 5 minute test. So I turned to good old Google for help. Of course it showed I could buy a gas leak tester for 30 quid, but I didn't fancy spending that. Would I be able to fix it anyway if I found it? Then I found out that a fine spray of soapy water on the joints should show up leaks as bubbles. So that was the plan for Sunday.

Saturday night was fireworks, and we went to a free (charity collection) display in Bracknell at the dry ski slope. A good opportunity to try out my new(ish) camera in difficult lighting conditions. I like this shot - it shows skiers holding flares approaching the audience.



I also tried out the camera's video facility and I was amazed by how good it was, including the sound. Sadly, Blogger doesn't support videos, and it takes a lot of bandwidth anyway, so I can't show them to you.

On Sunday it was back out to Herbie to attempt to find and fix the gas leak. The soap solution worked a treat and I immediately found the leak where the pipe union screws into the new regulator. A couple more tweaks of the spanners and it stopped. Now I feel a bit daft that I didn't check it in this way when I put the new regulator on. Oh well, we live and learn.

I also had a go over the boats charging system with the my multimeter. The voltmeters on the dash show different readings for the starter battery charging and the domestic batteries. When the engine is running, they should be the same as they are connected via a relay. I suspected a faulty relay, but the meter showed it to be OK. Anyway I now know the cause. The voltmeters on the dash are giving false readings! One is reading over one volt lower than it ought. So what looks like a faulty charging system isn't.

An Inspector Calls . . .

Boat Safety inspection this morning and Herbie almost passed. Electrics good, fuel lines / engine good, extinguishers etc good, gas appliances good. However the regulator on the gas bottle was knackered and letting too much pressure through, and the gas hose was out of date (I should have spotted that). Pressure testing also showed a slight gas leak, but I suspect that was the old regulator connection, which looked a bit dodgy. Anyway, I got straight to it and I've already replaced the reg and the hose with shiny new ones and await a recheck of the pressure in order to get the magic safety certificate. I just hope I've done the new connections up tightly enough.

Doing up the "fixed" end of the hose was fun, I had to squat down right inside the gas locker (along with 2 large gas bottles) to get at the connection. That was OK until I tried to get out again and realised I was stuck. Actually I was laughing at the stupidity of it all. Eventually I wriggled free and I'm here to tell the tale!

I general I was pleased, as the inspector said the boat was very professionally fitted out and in good nick.

Today was also the first frost of the season, although our moorings and the canal looked a picture in the autumn sunshine.

We've been away at Launde Abbey in Leicestershire for the annual bash of the Nonsuch Dulcimer Club. As well as meeting up with old friends, and having an AGM and a great concert, and some lat night tune sessions, I spent the daytime in workshops with Butch Ross , a great young dulcimer player from Kentucky. I'm not really a dulcimer player (Kath is rather better at the hammered variety), other instruments being my forte, but Butch managed to inspire me quite a bit so I'll have to get down to some more practice now.

No boats at Launde Abbey, but we did call in at Whilton marina as we drove past on the A5, to pick up a gas leak tester from the chandlery there - and to have a bite to eat and a cuppa in their excellent tea room alongside the canal. Whilton have more boats for sale than practically anywhere else, and whilst we're not boat shopping I couldn't resist having a quick glance over the for-sale bay. I didn't see inside any boats, but there were some lovely paint jobs in evidence.



Only three more days till our boat safety inspection. Tommorrow I need to get out to Herbie and do some last minute jobs to meet the requirements. I have to re-secure the batteries after I moved them about recently, and get rid of some redundant wiring left by the RCR man a while back.

Still not expert but a lot more knowledgable

I'm just back from my weekend course on Boat Electrics, complete with my certificate to prove it.

Of course the certificate doesn't prove I had to pass anything - just that I showed up! However, it was a great course run by Tony Brooks at Reading College (part of Thames Valley University). We not only covered basic electrical theory on engines and on domestic systems in the boat, but we also, in small groups, got to wire up all the electrical bits of the engine - starter, alternator, glow plugs, solenoids and relays, warning lights and dashboard meters etc. Not only that we built a small domestic circuit with lights, a motor (eg for a pump), fuses etc, then coupled the two circuits together for charging purposes using a split charge system. Finally we did a lot on battery planning and management and on diagnosing faults. My brain is now officially full!

If you have a boat, and you don't have a clue on electrics, you should go. Well worth the money.

We enjoy a pleasure cruise while the workers work

Just back from a few days on Herbie with friends Jan and Stephen. The weather forecast was for rain, but luckily it didn't, so we had a great time tootling up to Batchworth and back. Amazingly warm for the time of year, although we did have the coal stove to make us cosy in the evenings. This was Jan and Stephen's first trip aboard Herbie and they seemed to enjoy it. Anyway we got them home safe and dry and as you can see they were all smiles as they posed with Kath (and Herbie) at the end of the trip.



While we were relaxing, the workers on the canal were still hard at it. First there were the gravel boats which go back and forth all day between Denham and Hayes. When they're full they carry 70 tons of gravel and sit very low in the water and need a depth of six feet of water, so they sit mid channel and you have to move aside for them. Here's an empty one (except for a lot of water as ballast) approaching whilst in the background you can just see a full one going the other way.

Despite always having to give way to them, we really enjoy watching them and talking to the boatmen as we wind the locks for them. Its great to see the canals still being used for freight transport.

Then further up the cut, we came upon a gang relining the banks with sheet piling above Coppermill lock. They had an amazing machine sutting on a huge steel raft. Looking at first like a caterpillar tracked digger, it actually had a brilliant swiveling device for handling the piling and ramming it into the ground with a shuddering action.

The raft was so wide that only 7ft narrowboats (that's us) could squeeze past into the lock. Others had to wait for a couple of hours.

Strangely for the time of year, we saw more kingfishers this trip than ever before. There were even a couple flying past Herbie after we had moored up back at base.

Tomorrow I'm off on my 2 day Electrics for Boaters course at Reading. I've been busy trying to map out all the wiring on the boat because it came without useful circuit diagrams and nothing is labeled. It's all beginning to make sense, but I have plenty of questions to ask on the course.

Gone gongoozling

Over the weekend we walked the canal rather than boated it. Visting friends Rick and Marylin in Long Buckby we went for a walk in Braunston, perhaps England's most famous canal village, and took the opportunity to walk overland above the 2000 yard Braunston tunnel and see the air shaft chimneys.

Its quite a hill so its easy to see why they needed to build the tunnel.
Here we are at the southern portal as a boat emerges from its half hour trip underground.

Hopefully next year we'll be taking Herbie through here on our summer cruise.

Herbie now boasts a beautiful name brass made by Rick. We're not quite sure where best to hang it yet, but here it is alongside our quirky pressure gauge quartz clock.

We'll be back on the water next week for a few days with our friends Jan and Steven after their son's wedding at the weekend.